Roof Gangway

---

Weland roof gangway is approved for anchoring lifelines. For this reason no ridge railing is required for the section where this roof gangway is installed. Holders are to be mounted at maximum 1200 distance from each other. Design according to SSEN 516. A light and rigid gangway with extraordinary hold in all conditions. Easily carried out mounting thanks to pre-threaded holes and lap joints. The lap joint may be extended on the last fitting piece to avoid cutting on site.

---

Weland standing seam holder for seamed roofing sheet. Fixing is carried out by squeezing the holder onto the standing seam, no holing required. The holder fits all Weland product groups. The seam must be double-seamed.

---

Our own wire system for fall protection that meets the rules regarding fall protection when moving on the roof.

With a wire that is installed along the roof gangways, roof ladders, ridge rail or directly on the roof, you obtain a very flexible safety solution in connection with building and construction work as well as clearing snow. The users anchor their safety lines to the wire and they can then move freely across the entire roof area without having to reconnect.

NOTE! Weline systems may only be installed together with Weland roof safety system and this calculation is for straight montage where we can deliver a finished length of the wire. For systems with continuous wire in different directions, eg between walkway and roof ladder special skills are required.