Safety on the Roof- Weland Stål AB

Safety on the Roof
- 28/04/2016
- 44
- Safety on the Roof; Weland Stål AB
Use our calculation program to create complete tenders for your roof safety products directly on our website.
A stable snow guard that is ideally suited for older roofs where an older appearance is sought. Also works as an eaves railing. The fixings are installed with c/c max. 1200 mm (Calculate the c/c measurement here). The tubes are crimped at one end, which means that the tubes fit into each other and the joints only need to be secured with through bolts. It is also easy to slide the tubes into the mounts. Version in accordance with SS 831335.
A snow guard that only covers a short part of the length of the building, e.g. over a door, runs a considerable risk of being overloaded. We have developed a calculation in order to safeguard the function. Calculation of short snow guards
The projecting tube, calculated from the last mount, must not be longer than 300 mm. The tube must be locked at both ends so that it cannot rotate or be pulled out. |
|
Description | |
---|---|
Tube Ø 27 mm, 2.3 m | Show more infoShow less info |
|
|
Set of screws (2 screws / joint) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
The locking device is installed in the first and last mounts in each section. |
|
Description | |
---|---|
Locking device for 1 tube (6 / section) | Show more infoShow less info |
|
|
Locking device for 3 tubes (2 / section) | Show more infoShow less info |
|
|
Set of screws (6 screws / section) | Show more infoShow less info |
|
|
Set of bolts (1 bolt / locking device) (Only for 1-tube locking device) | Show more infoShow less info |
|
|
Set of nuts (1 nut / locking device) (Only for 1-tube locking device) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
Description | |
---|---|
90° bend for Ø 27 mm tube | Show more infoShow less info |
|
|
Set of bolts (1 bolt / joint) | Show more infoShow less info |
|
|
Set of nuts (1 nut / joint) | Show more infoShow less info |
|
|
To prevent falling ice, a sliding ice stop is available that can be fitted to the snow guard with 3 tubes. The sliding ice protection is made of plastic and is available in three colours. |
|
Description | |
---|---|
Sliding ice protection (plastic) | Show more infoShow less info |
|
|
Here you will find installation instructions related to this product
Products are stocked in:
Other colours, copper and stainless steel are available by order.
We keep part of our stainless steel range in stock.
Instructions for installation of snow guards in various snow zones and with various roof gradients
Safety on the Roof
A compilation of Weland Stål's experience of snow and ice on roofs.
Assembly instructions for ridge / eaves railings. 1-tube and 3-tube - MA1101
Assembly instructions for snow guard, 3-tube MA1205
The footplate is screwed to under-roofs in tongued and grooved boards, min. 17 mm or plywood min. 12 mm.
Adjustable Lath Mount Assembly Instructions.
Standing Seam Mount Assembly Instruction for Double-folded sheet metal
Base Plate Assembly Instruction
Assembly Instruction for Sealing Plate
Assembly instructions for fixing profile/metal MA1009
Assembly instructions for standing seam mount for diagonal fold MA1010
Assembly instructions for slate mount MA1011
Assembly instructions for corrugated fibre cement MA1014
Assembly instructions for fixing profile universal MA1015
Standing Seam Mount for "Snap-on Roofs? Assembly Instruction
Maintenance of roof safety products
Maintenance Instructions - FDU documentation for Weland Stål AB
Product Sheet - Snow Guard
Quality policy for Weland Stål AB
Environmental Policy of Weland Stål AB
ISO-certificate ISO 9001:2015 & ISO 14001:2015
ISO-certificate ISO 9001:2015
Environmental Declaration Weland Stål AB
CE-marking Snow guards
Guarantee for the surface treatment of roof safety products
3-tube snow guard. Standing seam mount. 90° railing bend hot dip galvanised
17/02/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Snow guard with 3 tubes, Roof gangway made of profile grating. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Lifeline hook. Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Snow guard with 3 tubes, Roof gangway made of profile grating. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Snow guard with 3 tubes, Roof gangway made of profile grating. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Roof ladder, Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Snow guard with 3 tubes angled at 90 degrees. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
Jönköping Kv. Andelen. Snow guard with 3 tubes, Roof gangway made of profile grating. Snow rake. Standing seam mount.
05/03/2012
Snow guard with 3 tubes
View gallery | ||
---|---|---|
|