Cat ladder

Create calculation

Calculate your roof protection

Use our calculation program to create complete tenders for your roof safety products directly on our website.



Product information: Cat ladder

Weland cat ladders are used in construction and industry and are approved in accordance with SS 831340 and SS-EN ISO 14122-4. Permanently installed cat ladders are used to provide access to roofs with up to 8 m difference in levels. The ladders must be installed so the top rung is 30 mm above the edge of the roof.

The handrail should be anchored to a roof gangway/roof ladder. Stop the ladders 3 m above the ground, if you want to prevent unauthorised access. The cat ladders can then be supplemented with a loose ladder and suspension fitting. For long ladders (longer than 10 m), there should be a half-landing, if possible. For a fall height exceeding 4 metres, the ladder must be fitted with fall protection.

Escape ladders should always have a safety cage when they are combined with an escape platform. This is to ensure you do not "step out into open space". The safety cage ends 2-2.5 m above the ground.

Cat ladders with accessories are also stocked in a stainless steel, acid-resistant version.

Ladder
Show/Hide all info

Lightweight ladder offering good stability. The ladder's stringers are in a roll-formed U-profile. The rungs are profiled to reduce the risk of slipping and are swaged on both the inside and outside for double safety. Version in accordance with SS 83 13 40 and SS-EN ISO 14122-4.

Description  
Ladder 1500 x 400 mm Show more infoShow less info
Ladder 1500 x 400 mm

Ladder 1500 x 400 mm

Ladder 1500 x 400 mm - ST1540
Ladder 1500 x 400 mm (Lacquered in red (RAL 3009)) - RST1540 Ladder 1500 x 400 mm (Lacquered in black (RAL 9005)) - SST1540
ArtNo. Surface treatment Price
RST1540 Lacquered in red (RAL 3009) 661 SEK
SST1540 Lacquered in black (RAL 9005) 661 SEK
GST1540 Lacquered in gray (RAL 7011) 661 SEK
LST1540 Special colour * 661 SEK
TST1540 Lacquered in brick red (RAL 8004) 661 SEK
ST1540 Magnelis 544 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

6.2 kg

1500 

400 mm

Ladder 1800 x 400 mm Show more infoShow less info
Ladder 1800 x 400 mm

Ladder 1800 x 400 mm

Ladder 1800 x 400 mm - ST1840
Ladder 1800 x 400 mm (Lacquered in red (RAL 3009)) - RST1840 Ladder 1800 x 400 mm (Lacquered in black (RAL 9005)) - SST1840
ArtNo. Surface treatment Price
RST1840 Lacquered in red (RAL 3009) 780 SEK
SST1840 Lacquered in black (RAL 9005) 780 SEK
GST1840 Lacquered in gray (RAL 7011) 780 SEK
LST1840 Special colour * 780 SEK
TST1840 Lacquered in brick red (RAL 8004) 780 SEK
ST1840 Magnelis 647 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

7.5 kg

1800 

400 mm

Ladder 2400 x 400 mm Show more infoShow less info
Ladder 2400 x 400 mm

Ladder 2400 x 400 mm

Ladder 2400 x 400 mm - ST2440
Ladder 2400 x 400 mm (Lacquered in red (RAL 3009)) - RST2440 Ladder 2400 x 400 mm (Lacquered in black (RAL 9005)) - SST2440
ArtNo. Surface treatment Price
RST2440 Lacquered in red (RAL 3009) 1044 SEK
SST2440 Lacquered in black (RAL 9005) 1044 SEK
GST2440 Lacquered in gray (RAL 7011) 1044 SEK
LST2440 Special colour * 1044 SEK
TST2440 Lacquered in brick red (RAL 8004) 1044 SEK
ST2440 Magnelis 866 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

10.1 kg

2400 

400 mm

Joint set (1 set / joint) Show more infoShow less info
Joint set (1 set / joint)

Joining Kit ladder

Joining Kit ladder - SK2500
Joining Kit ladder (Lacquered in red (RAL 3009)) - RSK2500 Joining Kit ladder (Lacquered in black (RAL 9005)) - SSK2500
ArtNo. Surface treatment Price
RSK2500 Lacquered in red (RAL 3009) 117 SEK
SSK2500 Lacquered in black (RAL 9005) 117 SEK
GSK2500 Lacquered in gray (RAL 7011) 117 SEK
LSK2500 Special colour * 117 SEK
TSK2500 Lacquered in brick red (RAL 8004) 117 SEK
SK2500 Magnelis 91 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.7 kg

Set of bolts (8 bolts / joint set) Show more infoShow less info
Set of bolts (8 bolts / joint set)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (8 nuts / joint set) Show more infoShow less info
Set of nuts (8 nuts / joint set)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 


Pair of brackets
Show/Hide all info

The length of the brackets is determined by the distance between the outer wall and the outer edge of the gutter.

The max. distance between mounting points in the wall is 2500 mm. The mounts are secured more tightly if the wall construction demands this.

Fixed brackets  
Bracket set 150 mm Show more infoShow less info
Bracket set 150 mm

Pair of Brackets

Pair of Brackets - KS0150
Pair of Brackets (Lacquered in red (RAL 3009)) - RKS0150 Pair of Brackets (Lacquered in black (RAL 9005)) - SKS0150
ArtNo. Surface treatment Price
RKS0150 Lacquered in red (RAL 3009) 353 SEK
SKS0150 Lacquered in black (RAL 9005) 353 SEK
GKS0150 Lacquered in gray (RAL 7011) 353 SEK
LKS0150 Special colour * 353 SEK
TKS0150 Lacquered in brick red (RAL 8004) 353 SEK
KS0150 Hot dip Galvanizing 296 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.74 kg

Bracket set 300 mm Show more infoShow less info
Bracket set 300 mm

Pair of Brackets

Pair of Brackets - KS0300
Pair of Brackets (Lacquered in red (RAL 3009)) - RKS0300 Pair of Brackets (Lacquered in black (RAL 9005)) - SKS0300
ArtNo. Surface treatment Price
RKS0300 Lacquered in red (RAL 3009) 353 SEK
SKS0300 Lacquered in black (RAL 9005) 353 SEK
GKS0300 Lacquered in gray (RAL 7011) 353 SEK
LKS0300 Special colour * 353 SEK
TKS0300 Lacquered in brick red (RAL 8004) 353 SEK
KS0300 Hot dip Galvanizing 296 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

1.74 kg

Set of bolts (2 bolts / bracket set) Show more infoShow less info
Set of bolts (2 bolts / bracket set)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (2 nuts / bracket set) Show more infoShow less info
Set of nuts (2 nuts / bracket set)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Adjustable brackets  
Adjustable bracket set 450-700 mm Show more infoShow less info
Adjustable bracket set 450-700 mm

Pair of Brackets

Pair of Brackets - KS4570
Pair of Brackets (Lacquered in red (RAL 3009)) - RKS4570 Pair of Brackets (Lacquered in black (RAL 9005)) - SKS4570
ArtNo. Surface treatment Price
RKS4570 Lacquered in red (RAL 3009) 659 SEK
SKS4570 Lacquered in black (RAL 9005) 659 SEK
GKS4570 Lacquered in gray (RAL 7011) 659 SEK
LKS4570 Special colour * 659 SEK
TKS4570 Lacquered in brick red (RAL 8004) 659 SEK
KS4570 Hot dip Galvanizing 556 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

7.92 kg

Adjustable bracket set 700-1000 mm Show more infoShow less info
Adjustable bracket set 700-1000 mm

Pair of Brackets

Pair of Brackets - KS7010
Pair of Brackets (Lacquered in black (RAL 9005)) - SKS7010
ArtNo. Surface treatment Price
RKS7010 Lacquered in red (RAL 3009) 659 SEK
SKS7010 Lacquered in black (RAL 9005) 659 SEK
GKS7010 Lacquered in gray (RAL 7011) 659 SEK
LKS7010 Special colour * 659 SEK
TKS7010 Lacquered in brick red (RAL 8004) 659 SEK
KS7010 Hot dip Galvanizing 556 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

10.1 kg

Set of bolts (8 bolts / bracket set) Show more infoShow less info
Set of bolts (8 bolts / bracket set)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (8 nuts / bracket set) Show more infoShow less info
Set of nuts (8 nuts / bracket set)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Extra fixings  
Fixing angle for fixing to the floor Show more infoShow less info
Fixing angle for fixing to the floor

Holder type 4

Holder type 4 - TS4000
Holder type 4 (Lacquered in red (RAL 3009)) - RTS4000 Holder type 4 (Lacquered in black (RAL 9005)) - STS4000
ArtNo. Surface treatment Price
RTS4000 Lacquered in red (RAL 3009) 54 SEK
STS4000 Lacquered in black (RAL 9005) 54 SEK
TTS4000 Lacquered in brick red (RAL 8004) 54 SEK
GTS4000 Lacquered in gray (RAL 7011) 54 SEK
LTS4000 Special colour * 54 SEK
TS4000 Magnelis 46 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.53 kg

Set of bolts (1 bolt / fixing angle) Show more infoShow less info
Set of bolts (1 bolt / fixing angle)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (1 nut / fixing angle) Show more infoShow less info
Set of nuts (1 nut / fixing angle)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 


Suspension fitting
Show/Hide all info

For suspending ladder from previously installed cat ladder.

Description  
Suspension fitting (1 set / ladder) Show more infoShow less info
Suspension fitting (1 set / ladder)

Mounting Brackets

Mounting Brackets - UB5003
Mounting Brackets (Lacquered in red (RAL 3009)) - RUB5003 Mounting Brackets (Lacquered in black (RAL 9005)) - SUB5003
ArtNo. Surface treatment Price
RUB5003 Lacquered in red (RAL 3009) 284 SEK
SUB5003 Lacquered in black (RAL 9005) 284 SEK
GUB5003 Lacquered in gray (RAL 7011) 284 SEK
LUB5003 Special colour * 284 SEK
TUB5003 Lacquered in brick red (RAL 8004) 284 SEK
UB5003 Magnelis 225 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.6 kg

Set of bolts (4 bolts / set) Show more infoShow less info
Set of bolts (4 bolts / set)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (4 nuts / set) Show more infoShow less info
Set of nuts (4 nuts / set)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 


Related products

Surface treatment

Products are stocked in:

  • Hot dip galvanised / Magnelis
  • Painted red
    (RAL 3009)
  • Painted black
    (RAL 9005)
  • Painted gray
    (RAL 7011)
  • Painted brick red
    (RAL 8004)

Other colours, copper and stainless steel are available by order.

We keep part of our stainless steel range in stock.




Accessories

Single handrail
Single handrail
Show/Hide all info

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

The handrail can be equipped with anchorage lugs at the top that are used when working on a step plate. The handrail can also be used with an external sleeve for removability, which is useful when the ladder is installed below a hatch.

Description  
1100 mm long bent handrail Show more infoShow less info
1100 mm long bent handrail

Handrail

Handrail - HL1200
ArtNo. Surface treatment Price
RHL1200 Lacquered in red (RAL 3009) 503 SEK
SHL1200 Lacquered in black (RAL 9005) 503 SEK
GHL1200 Lacquered in gray (RAL 7011) 503 SEK
LHL1200 Special colour * 503 SEK
THL1200 Lacquered in brick red (RAL 8004) 503 SEK
HL1200 Hot dip Galvanizing 386 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

2.8 kg

1100 mm

Set of bolts* Show more infoShow less info
Set of bolts*

Screw kit 10 ea. M10x60

Screw kit 10 ea. M10x60 - BU1601
ArtNo. Surface treatment Price
BU1601 Hot dip Galvanizing 49 SEK
Order article

0.41 kg

Set of nuts* Show more infoShow less info
Set of nuts*

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Plastic cover ( 1 / handrail) Show more infoShow less info
Plastic cover ( 1 / handrail)

Plastic lid

Plastic lid - PL0034
ArtNo. Surface treatment Price
PL0034 gray plastic 6 SEK
Order article

0.05 kg

Sleeve for removal of handrail Show more infoShow less info
Sleeve for removal of handrail

Bushing for handrail

Bushing for handrail - UH0515
ArtNo. Surface treatment Price
RUH0515 Lacquered in red (RAL 3009) 257 SEK
SUH0515 Lacquered in black (RAL 9005) 257 SEK
GUH0515 Lacquered in gray (RAL 7011) 257 SEK
LUH0515 Special colour * 257 SEK
TUH0515 Lacquered in brick red (RAL 8004) 257 SEK
UH0515 Hot dip Galvanizing 215 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

1.4 kg

* Requires 4 bolts/nuts for ladders without safety cage, and 8 bolts/nuts for ladders with safety cage.



Handrail with hoop
Handrail with hoop
Show/Hide all info

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

A hoop is mounted on the handrail to bridge the gap to the roof surface. Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

The handrail can be equipped with anchorage points at the top that are used when working on a step plate. The handrail can also be used with an external sleeve for removability, which is useful when the ladder is installed below a hatch.

Description  
1100 mm long bent handrail Show more infoShow less info
1100 mm long bent handrail

Handrail

Handrail - HL1200
ArtNo. Surface treatment Price
RHL1200 Lacquered in red (RAL 3009) 503 SEK
SHL1200 Lacquered in black (RAL 9005) 503 SEK
GHL1200 Lacquered in gray (RAL 7011) 503 SEK
LHL1200 Special colour * 503 SEK
THL1200 Lacquered in brick red (RAL 8004) 503 SEK
HL1200 Hot dip Galvanizing 386 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

2.8 kg

1100 mm

Handrail hoop Show more infoShow less info
Handrail hoop

Bow to handrail

Bow to handrail - HL1240
ArtNo. Surface treatment Price
RHL1240 Lacquered in red (RAL 3009) 391 SEK
SHL1240 Lacquered in black (RAL 9005) 391 SEK
GHL1240 Lacquered in gray (RAL 7011) 391 SEK
LHL1240 Special colour * 391 SEK
THL1240 Lacquered in brick red (RAL 8004) 391 SEK
HL1240 Hot dip Galvanizing 325 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

1.9 kg

Set of bolts* Show more infoShow less info
Set of bolts*

Screw kit 10 ea. M10x60

Screw kit 10 ea. M10x60 - BU1601
ArtNo. Surface treatment Price
BU1601 Hot dip Galvanizing 49 SEK
Order article

0.41 kg

Set of nuts* Show more infoShow less info
Set of nuts*

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Plastic cover ( 1 / handrail) Show more infoShow less info
Plastic cover ( 1 / handrail)

Plastic lid

Plastic lid - PL0034
ArtNo. Surface treatment Price
PL0034 gray plastic 6 SEK
Order article

0.05 kg

Sleeve for removal of handrail Show more infoShow less info
Sleeve for removal of handrail

Bushing for handrail

Bushing for handrail - UH0515
ArtNo. Surface treatment Price
RUH0515 Lacquered in red (RAL 3009) 257 SEK
SUH0515 Lacquered in black (RAL 9005) 257 SEK
GUH0515 Lacquered in gray (RAL 7011) 257 SEK
LUH0515 Special colour * 257 SEK
TUH0515 Lacquered in brick red (RAL 8004) 257 SEK
UH0515 Hot dip Galvanizing 215 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

1.4 kg

* Requires 4 bolts/nuts for ladders without safety cage, and 8 bolts/nuts for ladders with safety cage.



Handrail with brace
Handrail with brace
Show/Hide all info

The handrail is installed to the side of the ladders with or without safety cage. The handrail is folded 100 mm to the side to give more space for passing.

A brace is mounted on the handrail to a roof ladder/gangway, which bridges the gap to the roof surface. The length of the brace is adjusted during assembly, depending on the gradient of the roof.

Handrails are normally installed one on each side, but in some cases, it may be sufficient on just one side.

Description  
1100 mm long bent handrail Show more infoShow less info
1100 mm long bent handrail

Handrail

Handrail - HL1200
ArtNo. Surface treatment Price
RHL1200 Lacquered in red (RAL 3009) 503 SEK
SHL1200 Lacquered in black (RAL 9005) 503 SEK
GHL1200 Lacquered in gray (RAL 7011) 503 SEK
LHL1200 Special colour * 503 SEK
THL1200 Lacquered in brick red (RAL 8004) 503 SEK
HL1200 Hot dip Galvanizing 386 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

2.8 kg

1100 mm

Handrail brace Show more infoShow less info
Handrail brace

Brace to handrail

Brace to handrail - HL1290
ArtNo. Surface treatment Price
RHL1290 Lacquered in red (RAL 3009) 503 SEK
SHL1290 Lacquered in black (RAL 9005) 503 SEK
GHL1290 Lacquered in gray (RAL 7011) 503 SEK
LHL1290 Special colour * 503 SEK
THL1290 Lacquered in brick red (RAL 8004) 503 SEK
HL1290 Hot dip Galvanizing 386 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

2.9 kg

Set of bolts* Show more infoShow less info
Set of bolts*

Screw kit 10 ea. M10x60

Screw kit 10 ea. M10x60 - BU1601
ArtNo. Surface treatment Price
BU1601 Hot dip Galvanizing 49 SEK
Order article

0.41 kg

Set of nuts* Show more infoShow less info
Set of nuts*

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Plastic cover ( 1 / handrail) Show more infoShow less info
Plastic cover ( 1 / handrail)

Plastic lid

Plastic lid - PL0034
ArtNo. Surface treatment Price
PL0034 gray plastic 6 SEK
Order article

0.05 kg

* Requires 4 bolts/nuts for ladders without safety cage, and 8 bolts/nuts for ladders with safety cage.



Anchorage point
Anchorage point
Show/Hide all info

The anchorage point/attachment point is for the lifeline. The attachment lug is mounted on the top of the handrail and is primarily for use when working standing on the step plate.

Description  
Eye nut M10 25-45 Show more infoShow less info
Eye nut M10 25-45

Eye nut M10 25-45

Eye nut M10 25-45 - ÖM1000
ArtNo. Surface treatment Price
ÖM1000 Hot dip Galvanizing 112 SEK
Order article

0.09 kg

Bolt M10x50 Show more infoShow less info
Bolt M10x50

Bult M10x50

Bult M10x50 - BU1050
ArtNo. Surface treatment Price
BU1050 Hot dip Galvanizing 5 SEK
Order article

0.05 kg



Gate for cat ladder
Self-closing gate
Show/Hide all info

Self-closing gate for cat ladder.

Description  
Grind arc (1 ea.) Show more infoShow less info
Grind arc (1 ea.)

Grind arc to handrail

Grind arc to handrail - HL5843
ArtNo. Surface treatment Price
RHL5843 Lacquered in red (RAL 3009) 975 SEK
SHL5843 Lacquered in black (RAL 9005) 975 SEK
GHL5843 Lacquered in gray (RAL 7011) 975 SEK
LHL5843 Special colour * 975 SEK
THL5843 Lacquered in brick red (RAL 8004) 975 SEK
HL5843 Hot dip Galvanizing 847 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

4.28 kg

Hinge set pipe Show more infoShow less info
Hinge set pipe

Hinge set pipe 34 mm

Hinge set pipe 34 mm - GJ3400
Hinge set pipe 34 mm (Lacquered in black (RAL 9005)) - SGJ3400 Hinge set pipe 34 mm (Lacquered in red (RAL 3009)) - RGJ3400 Hinge set pipe 34 mm (Lacquered in gray (RAL 7011)) - GGJ3400
ArtNo. Surface treatment Price
LGJ3400 Special colour * 385 SEK
SGJ3400 Lacquered in black (RAL 9005) 385 SEK
RGJ3400 Lacquered in red (RAL 3009) 385 SEK
GGJ3400 Lacquered in gray (RAL 7011) 385 SEK
TGJ3400 Lacquered in brick red (RAL 8004) 385 SEK
GJ3400 Hot dip Galvanizing 360 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.16 kg

Self-drilling screws (10 screws / gate) Show more infoShow less info
Self-drilling screws (10 screws / gate)

Self-drilling screws 10 ea. 5,5x22

Self-drilling screws 10 ea. 5,5x22 - SS5221
ArtNo. Surface treatment Price
SS5221 Hot dip Galvanizing 61 SEK
Order article

0.07 kg


Self-drilling screws 50 ea. 5,5x22

Self-drilling screws 50 ea. 5,5x22 - SS5225
ArtNo. Surface treatment Price
SS5225 Hot dip Galvanizing 287 SEK

0.35 kg

For lock option
Half hinge Show more infoShow less info
Half hinge

Half hinge 34 mm

Half hinge 34 mm - GJ3401
Half hinge 34 mm (Lacquered in gray (RAL 7011)) - GGJ3401 Half hinge 34 mm (Lacquered in red (RAL 3009)) - RGJ3401 Half hinge 34 mm (Lacquered in black (RAL 9005)) - SGJ3401
ArtNo. Surface treatment Price
LGJ3401 Special colour * 162 SEK
GGJ3401 Lacquered in gray (RAL 7011) 162 SEK
RGJ3401 Lacquered in red (RAL 3009) 162 SEK
SGJ3401 Lacquered in black (RAL 9005) 162 SEK
TGJ3401 Lacquered in brick red (RAL 8004) 162 SEK
GJ3401 Hot dip Galvanizing 144 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.1 kg

Self-drilling screws (10 screws / gate) Show more infoShow less info
Self-drilling screws (10 screws / gate)

Self-drilling screws 10 ea. 5,5x22

Self-drilling screws 10 ea. 5,5x22 - SS5221
ArtNo. Surface treatment Price
SS5221 Hot dip Galvanizing 61 SEK
Order article

0.07 kg


Self-drilling screws 50 ea. 5,5x22

Self-drilling screws 50 ea. 5,5x22 - SS5225
ArtNo. Surface treatment Price
SS5225 Hot dip Galvanizing 287 SEK

0.35 kg



Safety cage
Safety cage
Show/Hide all info

In the event of a falling height of more than 4 metres, the ladder must be fitted with a safety cage in accordance with BBR. The safety cage for the cat ladder is made up of modules with a length of 900 mm. The safety cage ends 2-2.5 m above ground and can be supplied with a hatch to prevent unauthorised access. Version in accordance with SS 83 13 40.

Description  
Safety cage kit, 5 intermediate rails, 900 mm Show more infoShow less info
Safety cage kit, 5 intermediate rails, 900 mm

Hoop Guard Kit

Hoop Guard Kit - SK9005
Hoop Guard Kit (Lacquered in red (RAL 3009)) - RSK9005 Hoop Guard Kit (Lacquered in black (RAL 9005)) - SSK9005
ArtNo. Surface treatment Price
RSK9005 Lacquered in red (RAL 3009) 366 SEK
SSK9005 Lacquered in black (RAL 9005) 366 SEK
GSK9005 Lacquered in gray (RAL 7011) 366 SEK
LSK9005 Special colour * 366 SEK
TSK9005 Lacquered in brick red (RAL 8004) 366 SEK
SK9005 Magnelis 267 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

2.95 kg

900 mm

Hoop guard set (every 900 mm) Show more infoShow less info
Hoop guard set (every 900 mm)

Hoop Kit

Hoop Kit - SK0650
Hoop Kit (Lacquered in red (RAL 3009)) - RSK0650 Hoop Kit (Lacquered in black (RAL 9005)) - SSK0650
ArtNo. Surface treatment Price
RSK0650 Lacquered in red (RAL 3009) 255 SEK
SSK0650 Lacquered in black (RAL 9005) 255 SEK
GSK0650 Lacquered in gray (RAL 7011) 255 SEK
LSK0650 Special colour * 255 SEK
TSK0650 Lacquered in brick red (RAL 8004) 255 SEK
SK0650 Magnelis 221 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

2.08 kg

Set of bolts (7 bolts / hoop) Show more infoShow less info
Set of bolts (7 bolts / hoop)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (7 nuts / hoop) Show more infoShow less info
Set of nuts (7 nuts / hoop)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Safety cage expander (1 ea. when using handrail) Show more infoShow less info
Safety cage expander (1 ea. when using handrail)

Safety cage expander

Safety cage expander - SK0200
Safety cage expander (Lacquered in red (RAL 3009)) - RSK0200 Safety cage expander (Lacquered in black (RAL 9005)) - SSK0200 Safety cage expander (Lacquered in gray (RAL 7011)) - GSK0200
ArtNo. Surface treatment Price
RSK0200 Lacquered in red (RAL 3009) 107 SEK
SSK0200 Lacquered in black (RAL 9005) 107 SEK
GSK0200 Lacquered in gray (RAL 7011) 107 SEK
LSK0200 Special colour * 107 SEK
TSK0200 Lacquered in brick red (RAL 8004) 107 SEK
SK0200 Magnelis 94 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

0.25 kg

Set of bolts (2 bolts / safety cage expander) Show more infoShow less info
Set of bolts (2 bolts / safety cage expander)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (2 nuts / safety cage expander) Show more infoShow less info
Set of nuts (2 nuts / safety cage expander)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 



Lockable hatch
Lockable hatch
Show/Hide all info

Hatch for preventing unauthorised persons climbing any ladder with safety cage.

The hatch is installed on the rear edge of the safety cage brace and it can be locked with a padlock round the safety cage hoop to prevent unauthorised access. The hatch is raised up against the safety cage when passing.

Description  
Lockable hatch for safety cage hoop Show more infoShow less info
Lockable hatch for safety cage hoop

Lockable hatch for cat ladder

Lockable hatch for cat ladder - LL4570
Lockable hatch for cat ladder (Lacquered in black (RAL 9005)) - SLL4570 Lockable hatch for cat ladder (Lacquered in gray (RAL 7011)) - GLL4570 Lockable hatch for cat ladder (Lacquered in red (RAL 3009)) - RLL4570
ArtNo. Surface treatment Price
SLL4570 Lacquered in black (RAL 9005) 2344 SEK
GLL4570 Lacquered in gray (RAL 7011) 2344 SEK
LLL4570 Special colour * 2344 SEK
RLL4570 Lacquered in red (RAL 3009) 2344 SEK
TLL4570 Lacquered in brick red (RAL 8004) 2344 SEK
LL4570 Magnelis 1912 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

4.08 kg

M10 Locking nut Show more infoShow less info
M10 Locking nut

M10 Locking nut

M10 Locking nut - LM1000
ArtNo. Surface treatment Price
LM1000 Hot dip Galvanizing 6 SEK
Order article

0.01 kg

Screw kit 10 ea. M10x20 Show more infoShow less info
Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 



Standing platform 300 x 400 mm
Standing platform
Show/Hide all info

NOTE! Standing platform requires 250 mm of free space against the wall.

Description  
Standing platform 300 x 400 mm, adjustable 0-20° Show more infoShow less info
Standing platform 300 x 400 mm, adjustable 0-20°

Step Plate

Step Plate - SP3040
Step Plate (Lacquered in red (RAL 3009)) - RSP3040 Step Plate (Lacquered in black (RAL 9005)) - SSP3040
ArtNo. Surface treatment Price
RSP3040 Lacquered in red (RAL 3009) 748 SEK
SSP3040 Lacquered in black (RAL 9005) 748 SEK
GSP3040 Lacquered in gray (RAL 7011) 748 SEK
LSP3040 Special colour * 748 SEK
TSP3040 Lacquered in brick red (RAL 8004) 748 SEK
SP3040 Magnelis 649 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

3.3 kg

Set of bolts (2 bolts / standing platform) Show more infoShow less info
Set of bolts (2 bolts / standing platform)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Set of nuts (2 nuts / standing platform) Show more infoShow less info
Set of nuts (2 nuts / standing platform)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 



Foldable step plate, 370x400 mm single
Single
Foldable step plate, 370x160 mm double (kit)
Double
Folding step plate
Show/Hide all info

Two step plates for cat ladders. Both of them are folding. They can be used when an intermediate landing is needed at the middle of the cat ladder to make standing more comfortable. This could be a service point or at the middle of a long section of cat ladders.

The plate is normally folded up behind the rungs and it is easily pulled out with the foot.

The step plate is available for the whole of the ladder's width or split up so it can be used with vertical fall protection railing/safety wire.

The single step plate is mounted using 2x M10x20 + locking nuts. The double plate is sold as a complete set with all necessary fastening material.

Description  
Folding step plate 370x400 (single) Show more infoShow less info
Folding step plate 370x400 (single)

Folding step plate single 370x400mm

Folding step plate single 370x400mm - SP3740
ArtNo. Surface treatment Price
RSP3740 Lacquered in red (RAL 3009) 1157 SEK
SSP3740 Lacquered in black (RAL 9005) 1157 SEK
GSP3740 Lacquered in gray (RAL 7011) 1157 SEK
LSP3740 Special colour * 1157 SEK
TSP3740 Lacquered in brick red (RAL 8004) 1157 SEK
SP3740 Magnelis 1004 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

3.7 kg

Set of bolts (2 bolts / single step) Show more infoShow less info
Set of bolts (2 bolts / single step)

Screw kit 10 ea. M10x20

Screw kit 10 ea. M10x20 - BU1201
ArtNo. Surface treatment Price
BU1201 Hot dip Galvanizing 47 SEK
Order article

0.2 kg

10 ea

M10x20 


Screw kit 100 ea. M10x20

Screw kit 100 ea. M10x20 - BU1200
ArtNo. Surface treatment Price
BU1200 Hot dip Galvanizing 330 SEK
Order article

2 kg

100 ea

M10x20 

Locking nut stainless (2 nuts / single step) Show more infoShow less info
Locking nut stainless (2 nuts / single step)

M10 Locking nut

M10 Locking nut - LM1000
ArtNo. Surface treatment Price
LM1000 Hot dip Galvanizing 6 SEK
Order article

0.01 kg

Folding step plate 2x370x160 (double) Show more infoShow less info
Folding step plate 2x370x160 (double)

Folding step plate double 370x160 (kit)

Folding step plate double 370x160 (kit) - SP3716
ArtNo. Surface treatment Price
SP3716 Magnelis 1901 SEK
Order article

3.3 kg



Reinforcement of cat ladder
Reinforcement of cat ladder
Show/Hide all info

Sometimes, a freestanding cat ladder is needed between floor and mezzanine, where the height exceeds 2.5 m. It may be necessary to get past glass partitions or other constructions where there are no possibilities for attachment.

As a supplier of cat ladders for many years, Weland Stål has come across this problem every now and again and has developed a standard solution. We call it a stiffening rail and, with it installed on the side of the ladder, the separation between the fixing points can be stretched up to 5.7 m.

The stiffening rail is a bent section with a length of 1200 mm, which hook into each other and bolt to the side of the ladder. With an ingenious hook at the end of the section, we can construct a strong support profile using short sections. With a stiffening rail installed, the max. separation is 5.7 m compared to the standard 2.5 m. The rail can be used together with other accessories such as safety cage, standing platform, handrail, etc.

Description  
Stiffening rail cat ladder Show more infoShow less info
Stiffening rail cat ladder

Stiffening rail cat ladder

Stiffening rail cat ladder - ST1200
Stiffening rail cat ladder (Lacquered in black (RAL 9005)) - SST1200 Stiffening rail cat ladder (Lacquered in red (RAL 3009)) - RST1200 Stiffening rail cat ladder (Lacquered in gray (RAL 7011)) - GST1200
ArtNo. Surface treatment Price
SST1200 Lacquered in black (RAL 9005) 878 SEK
RST1200 Lacquered in red (RAL 3009) 878 SEK
GST1200 Lacquered in gray (RAL 7011) 878 SEK
LST1200 Special colour * 878 SEK
TST1200 Lacquered in brick red (RAL 8004) 878 SEK
ST1200 Hot dip Galvanizing 762 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

5.6 kg

1200 mm



Anti-climbing device for cat ladder
Anti-climbing device
Show/Hide all info

Device to prevent climbing of the cat ladder.

Description  
Lockable anti-climbing device Show more infoShow less info
Lockable anti-climbing device

Anti-climb security panel for cat ladder. Lockable

Anti-climb security panel for cat ladder. Lockable - KH2100
ArtNo. Surface treatment Price
RKH2100 Lacquered in red (RAL 3009) 4620 SEK
SKH2100 Lacquered in black (RAL 9005) 4620 SEK
GKH2100 Lacquered in gray (RAL 7011) 4620 SEK
LKH2100 Special colour * 4620 SEK
TKH2100 Lacquered in brick red (RAL 8004) 4620 SEK
KH2100 Magnelis 3554 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

14.65 kg



Intermediate landing for cat ladder
Intermediate landing
Show/Hide all info

In order to improve safety, ladders that are longer than 6 metres should be supplied with an intermediate landing/load distribution beam. On very long ladders, the distance between the intermediate landings should not exceed 6 metres. Version in accordance with SS 83 13 40.

Intermediate landings comprise the following components:

  • 1 grating with edging bars
  • 4 angle stays
  • 4 "half" safety cage hoops
  • 2 horizontal flat bars
  • 7 vertical flat bars

NOTE! Each intermediate landing requires 2.1 m extra ladder.

Description  
Intermediate landing 600 x 600 mm Show more infoShow less info
Intermediate landing 600 x 600 mm

Rest Landing 600 x 600 mm

Rest Landing 600 x 600 mm - VP6060
ArtNo. Surface treatment Price
SVP6060 Lacquered in black (RAL 9005) 3064 SEK
GVP6060 Lacquered in gray (RAL 7011) 3064 SEK
LVP6060 Special colour * 3064 SEK
TVP6060 Lacquered in brick red (RAL 8004) 3064 SEK
VP6060 Hot dip Galvanizing 2404 SEK

* = A set fee of 3000 SEK will be added for each configuration

Order article

23 kg



Drop Down ladder
Drop Down ladder
Show/Hide all info

Weland Stål has developed a solution for those who need to get down but don't want to let others get up. We call it the Drop Down Ladder; this is a permanent cat ladder installed on the wall that is supplemented with an extra ladder, slide fitting and locking device.

With our solution, you can let the permanent ladder finish a good way up the wall and, even so, have access to an evacuation ladder that reaches all the way to the ground. On evacuation, you climb down the ladder, kick the locking device, on which the loose ladder comes loose and slides down to the ground. Thereafter, just continue on down to the ground.

See how it works in our video or take a look at the assembly instruction MA1607.

Description  
Drop down ladder lock catch Show more infoShow less info
Drop down ladder lock catch

Drop down ladder lock catch

Drop down ladder lock catch - FB7001
ArtNo. Surface treatment Price
LFB7001 Special colour * 361 SEK
FB7001 Magnelis 289 SEK

* = A set fee of 3000 SEK will be added for each configuration

0.1 kg

Drop down ladder slide fitting Show more infoShow less info
Drop down ladder slide fitting

Drop down ladder slide fitting

Drop down ladder slide fitting - FB7000
ArtNo. Surface treatment Price
LFB7000 Special colour * 312 SEK
FB7000 Magnelis 251 SEK

* = A set fee of 3000 SEK will be added for each configuration

0.15 kg

Rubber stop Show more infoShow less info
Rubber stop

Rubber stop

Rubber stop - FB7002
ArtNo. Surface treatment Price
FB7002 Hot dip Galvanizing 151 SEK

0.17 kg

Fixings

Base plate
Show/Hide all info

The base plate is used to spread the point of attachment to the wall. Used with sandwich element, concrete or wooden facades.

Description  
Base plate for panel wall (1 plate / bracket) Show more infoShow less info
Base plate for panel wall (1 plate / bracket)

Base plate

Base plate - FP0300
ArtNo. Surface treatment Price
FP0300 Magnelis 62 SEK
Order article

0.44 kg

Set of bolts (2 bolts / base plate) Show more infoShow less info
Set of bolts (2 bolts / base plate)

Carriage bolts 10 ea. M10x30

Carriage bolts 10 ea. M10x30 - VB1301
ArtNo. Surface treatment Price
VB1301 Hot dip Galvanizing 47 SEK
Order article

0.25 kg


Carriage bolts 50 ea. M10x30

Carriage bolts 50 ea. M10x30 - VB1305
ArtNo. Surface treatment Price
VB1305 Hot dip Galvanizing 194 SEK
Order article

1.25 kg

Set of nuts (2 nuts / base plate) Show more infoShow less info
Set of nuts (2 nuts / base plate)

Screw nut kit 10 ea. M10

Screw nut kit 10 ea. M10 - MU1001
ArtNo. Surface treatment Price
MU1001 Hot dip Galvanizing 18 SEK
Order article

0.13 kg

M10 


Screw nut kit 100 ea. M10

Screw nut kit 100 ea. M10 - MU1010
ArtNo. Surface treatment Price
MU1010 Hot dip Galvanizing 131 SEK
Order article

1.3 kg

M10 

Set of screws for sheet metal <0.7 mm (6 screws/base plate) Show more infoShow less info
Set of screws for sheet metal <0.7 mm (6 screws/base plate)

Self-threading screws 10 ea. 6,3x19

Self-threading screws 10 ea. 6,3x19 - SS6191
ArtNo. Surface treatment Price
SS6191 stainless 49 SEK
Order article

0.07 kg


Self-threading screws 100 ea. 6,3x19

Self-threading screws 100 ea. 6,3x19 - SS6190
ArtNo. Surface treatment Price
SS6190 stainless 297 SEK
Order article

0.61 kg

Set of self drilling screws for sheet metal >=0.7 mm (6 screws/base plate) Show more infoShow less info
Set of self drilling screws for sheet metal >=0.7 mm (6 screws/base plate)

Self-drilling screws 10 ea. 5,5x22

Self-drilling screws 10 ea. 5,5x22 - SS5221
ArtNo. Surface treatment Price
SS5221 Hot dip Galvanizing 61 SEK
Order article

0.07 kg


Self-drilling screws 50 ea. 5,5x22

Self-drilling screws 50 ea. 5,5x22 - SS5225
ArtNo. Surface treatment Price
SS5225 Hot dip Galvanizing 287 SEK

0.35 kg

Set of screws for wood (6 screws / base plate) Show more infoShow less info
Set of screws for wood (6 screws / base plate)

Needle screws 10 ea. 6x35

Needle screws 10 ea. 6x35 - TS6351
ArtNo. Surface treatment Price
TS6351 Hot dip Galvanizing 49 SEK
Order article

0.05 kg

Chimney tie
Show/Hide all info

See "Chimney tie" for more information


Documentation

Brochures

Assembly Instructions

Maintenance Instructions

Maintenance Instructions - FDU documentation

Maintenance Instructions - FDU documentation for Weland Stål AB

  • 12/09/2013
  • 5
  • basis for design & calculations; materials and manufacturing; surface treatment; handling; maintenance; care of hot dip galvanised products; care of Painted surfaces; care of wooden parts; care of mats on steps or landings; care of terrazzo
  • pdf

CAD details

Certificates

Load tables

Films


Reference images

Search for images
   
Show page of 1

Results are filtered at: 


  • be00002695.jpg

    be00002695.jpg

    Cat ladder with safety cage and handrail with hoop.

    17/03/2016


    Included in gallery:

    Cat ladder

  • be00002692.jpg

    be00002692.jpg

    Cat ladder with safety cage and handrail with hoop.

    17/03/2016


    Included in gallery:

    Cat ladder

  • be00002669.jpg

    be00002669.jpg

    Cat ladder with handrail and braces.

    26/02/2016


    Included in gallery:

    Cat ladder

  • be00002564_150908.jpg

    be00002564_150908.jpg

    Cat ladder with platform in special colour.

    15/09/2015


    Included in gallery:

    Cat ladder

  • be00002565_150908.jpg

    be00002565_150908.jpg

    Cat ladder with platform in special colour.

    15/09/2015


    Included in gallery:

    Cat ladder

  • be00002567.jpg

    be00002567.jpg

    Cat ladder in central Visby.

    15/09/2015


    Included in gallery:

    Cat ladder

  • be00002473.jpg

    be00002473.jpg

    Cat ladder that transitions into steep roof ladder.

    29/01/2015


    Included in gallery:

    Cat ladder

  • be00002478.jpg

    be00002478.jpg

    Cat ladder between two roofs, lifeline mounts.

    29/01/2015


    Included in gallery:

    Cat ladder

  • be00001926.jpg

    be00001926.jpg

    Roof ladder and cat ladder long brackets, standing seam mount painted black

    11/08/2005


    Included in gallery:

    Cat ladder

  • be00001860.jpg

    be00001860.jpg

    Home roof ladder roof gangway tiled roof chimney ladder with chimney tie hot dip galvanised

    14/05/2011


    Included in gallery:

    Cat ladder

  • be00001872.jpg

    be00001872.jpg

    Project in Huddinge Cat ladders, roof gangways, roof ladders standing seam mount hot dip galvanised

    16/11/2011


    Included in gallery:

    Cat ladder

  • be00001864.jpg

    be00001864.jpg

    Project in Huddinge Cat ladder, handrail

    16/11/2011


    Included in gallery:

    Cat ladder

 
View gallery