Safety on the Roof- Weland Stål AB

Safety on the Roof
- 28/04/2016
- 44
- Safety on the Roof; Weland Stål AB
Fast, simple fixing of all product groups. The footplate is used when it is difficult to gain access under the tongued and grooved board. For example, where there is an air gap or insulated false ceilings and furnished attics. The footplate is approved down to 17 mm tongued and grooved board / 12 mm plywood. |
|
Description | |
---|---|
Adjustable fixing for clay tiles | Show more infoShow less info |
|
|
Adjustable fixing for concrete tiles | Show more infoShow less info |
|
|
Footplate | Show more infoShow less info |
|
|
Set of screws (10 screws / footplate) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / footplate) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / footplate) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
Simple fixing where there is a false ceiling of plastic film, fibreboard or particle board that does not allow fixing in the false ceiling. The lath dimensions must be at least 45 x 70 mm. The lath mount is installed on top and has no hook on the underside, which means that installation can also be performed above the roof truss. The fixing is approved for all product groups. |
||
Description | ||
---|---|---|
Adjustable fixing for clay tiles | Show more infoShow less info | |
|
||
Adjustable fixing for concrete tiles | Show more infoShow less info | |
|
||
Set of bolts (2 bolt / mount) | Show more infoShow less info | |
|
||
Set of screws (5 screws / mount) | Show more infoShow less info | |
|
||
Reinforcement profile lath 680mm zm | Show more infoShow less info | |
|
||
Mounting tools | ||
Socket with ball E6 H8.0x50 | Show more infoShow less info | |
|
||
Bit holder E6 1/4x55 MC | Show more infoShow less info | |
|
||
The quick fixing mount has been specially developed for installation at the eaves and other locations where it is difficult to install backing plates. The quick fixing mount is approved for all types of fixings in 22 mm tongued and grooved board. | |
Description | |
---|---|
Fixing, type 5 - plain roofs | Show more infoShow less info |
|
|
Rubber washer Ø35 mm (2 / fixing) | Show more infoShow less info |
|
|
Backing plate | |
Angle-iron backing plate, 500 mm | Show more infoShow less info |
|
|
Set of bolts (2 bolts / angle-iron) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / angle-iron) | Show more infoShow less info |
|
|
Quick fixing mount | |
Quick fixing mount with nut and washer, 135 mm | Show more infoShow less info |
|
|
Quick fixing mount with nut and washer, 60 mm | Show more infoShow less info |
|
|
Set of nuts (1 nut / quick fixing mount) | Show more infoShow less info |
|
|
Rubber cone for quick fixing mount | Show more infoShow less info |
|
|
Base plate | |
Base plate | Show more infoShow less info |
|
|
Needle screws (10 screws / plate) | Show more infoShow less info |
|
|
Screw kit (2 screws / plate) | Show more infoShow less info |
|
|
Screw nut kit (2 nuts / plate) | Show more infoShow less info |
|
|
Fixing for roof safety on sealing layer mat and roof membrane. The fixing fits all products in Weland Stål's product range. A unique product that allows simple, secure, sealed installation, regardless of the surface. The sealing plate is supplied in a raised and a smooth version. The raised version has pre-threaded holes to make installation easier. Tested and approved for all sealing layers according to minimum function requirement 121 specified in BRF report R57:1990. | |
Description | |
---|---|
Fixing type 5 for roofing felt and membrane roofs | Show more infoShow less info |
|
|
Rubber washer Ø35 mm (2 / fixing) | Show more infoShow less info |
|
|
Sealing plate, raised | Show more infoShow less info |
|
|
Sealing plate, smooth | Show more infoShow less info |
|
|
Set of bolts for raised (2 bolts / plate) | Show more infoShow less info |
|
|
Set of bolts for smooth (2 bolts / plate) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / plate) | Show more infoShow less info |
|
|
Weland standing seam mount for folded metal roof. Fixing is achieved without making any holes, by clamping the mount onto the standing fold. The mount fits all of Weland's product groups. The standing seam mount is approved for installation on double-folded steel, zinc, stainless steel, copper and aluminium plate. Also approved for stainless steel seam-welded folds. |
|
Description | |
---|---|
Integrated standing seam mount, installed | Show more infoShow less info |
|
|
Integrated standing seam mount for prefabricated strip covering, so-called Snap-on-Roofs. The mounts are approved for installation on all available makes of Snap-on-Roof and they function in the same way as the standard standing seam mounts. The standing seam mount comes ready for mounting on plates that are laid from right to left, which is the most common way. If the metal roof is laid from the other direction, the jaws should be removed and mounted on the other side of the mount. Approved for the installation of ridge railings, snow guards, guardrails and roof gangways. The mount is not approved as a single fastener for lifelines, at least 2 mounts with a pipe in-between are required. |
|
Description | |
---|---|
Integrated standing seam mount for Snap-on-Roofs | Show more infoShow less info |
|
|
Weland profiled bracket for roof coverings of profiled sheet, is fixed by self-threading screw (sheet thickness minimum 0.5 mm). The profiled bracket is approved for all product groups. When ordering state manufacturer and type of sheet. Profiled brackets are kept in stock for all customary types of profiled sheet. |
|
Description | |
---|---|
Holder type 5 | Show more infoShow less info |
|
|
Profiled bracket 330 mm | Show more infoShow less info |
|
|
Set of screws for sheet metal <0.7 mm (10 screws/bracket) | Show more infoShow less info |
|
|
Set of self drilling screws for sheet metal >=0.7 mm (10 screws/bracket) | Show more infoShow less info |
|
|
Carrige bolts (2 bolts / bracket) | Show more infoShow less info |
|
|
Screw nut kit (2 bolts / bracket) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
Weland Profiled bracket Universal fits all profiled metal roof. The bracket is fixed in the double-skin at the overlap joint with self-threading screw in at least 0.4 mm sheet steel, alternatively 0.5 mm aluminum sheet. Profiled bracket Universal is approved for all product groups. |
|
Description | |
---|---|
Profiled bracket Universal | Show more infoShow less info |
|
|
Set of screws for sheet metal <0.7 mm (10 screws/bracket) | Show more infoShow less info |
|
|
Set of self drilling screws for sheet metal >=0.7 mm (10 screws/bracket) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
Weland fixing plate is used for all product groups, applied for tile profiled and certain types of trapeze profiled roofing sheets. The fixing plate is mounted with U-bolt passed from above. Approved for steel sheet with thickness of minimum 0.5 mm. |
|
Description | |
---|---|
Holder type 5 | Show more infoShow less info |
|
|
Universal fixing plate c/c 120-170 mm | Show more infoShow less info |
|
|
Universal fixing plate c/c 170-220 | Show more infoShow less info |
|
|
Screw kit (1 kit / plate) | Show more infoShow less info |
|
|
Fast, simple fixing of all product groups. The footplate is used when it is difficult to gain access under the tongued and grooved board. For example, where there is an air gap or insulated false ceilings and furnished attics. The footplate is approved down to 17 mm tongued and grooved board / 12 mm plywood. |
|
Description | |
---|---|
Footplate (1 / fixing) | Show more infoShow less info |
|
|
Fixing iron (1 / fixing) | Show more infoShow less info |
|
|
Spacer* (1 / fixing) | Show more infoShow less info |
|
|
Set of bolts for spacer* (1 set / spacer) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / fixing iron) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / fixing iron) | Show more infoShow less info |
|
|
Set of wood screws (10 screws / footplate | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
Simple fixing where there is a false ceiling of plastic film, fibreboard or particle board that does not allow fixing in the false ceiling. The lath dimensions must be at least 45 x 70 mm. The lath mount is installed on top and has no hook on the underside, which means that installation can also be performed above the roof truss. The fixing is approved for all product groups. |
|
Description | |
---|---|
Fixing iron (1 / fixing) | Show more infoShow less info |
|
|
Spacer* (1 / fixing) | Show more infoShow less info |
|
|
Set of bolts for spacer* (1 set / spacer) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / fixing iron + 2 bolts / lath mount) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / fixing iron + 2 bolts / lath mount) | Show more infoShow less info |
|
|
Lateral displacement lath mount (1 / fixing) | Show more infoShow less info |
|
|
Wood screws (5 screws / mount) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
Fixing can be performed with a backing plate or a quick fixing mount. The quick fixing mount has been specially developed for installation at the eaves and other locations where it is difficult to install backing plates. The quick fixing mount is approved for all types of fixings in 22 mm tongued and grooved board. |
|
Description | |
---|---|
Spacer* | Show more infoShow less info |
|
|
Set of bolts for spacer (1 set / fixing) | Show more infoShow less info |
|
|
Rubber washer Ø35 mm (2 / fixing) | Show more infoShow less info |
|
|
Backing plate | |
Angle-iron backing plate, 500 mm (1 / fixing) | Show more infoShow less info |
|
|
Set of bolts for angle-iron M10 x 60 (2 bolts / angle-iron) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / angle-iron) | Show more infoShow less info |
|
|
Quick fixing mount | |
Quick fixing mount with nut and washer, 135 mm | Show more infoShow less info |
|
|
Quick fixing mount with nut and washer, 60 mm | Show more infoShow less info |
|
|
Rubber cone for quick fixing mount | Show more infoShow less info |
|
|
Set of nuts (1 nut / quick fixing mount) | Show more infoShow less info |
|
|
Base plate | |
Base plate | Show more infoShow less info |
|
|
Wood screws (10 screws / base plate) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / base plate) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / base plate) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
Description | |
---|---|
Fixing angle, type 4 | Show more infoShow less info |
|
|
Rubber washer Ø35 mm (1 / mount) | Show more infoShow less info |
|
|
Set of bolts (1 bolt / mount) | Show more infoShow less info |
|
|
Set of nuts (1 nut / mount) | Show more infoShow less info |
|
|
Backing plate | |
Angle-iron backing plate, 500 mm (1 / mount) | Show more infoShow less info |
|
|
Set of bolts for angle-iron M10 x 60 (1 bolt / angle-iron) | Show more infoShow less info |
|
|
Set of nuts (1 nut / angle-iron) | Show more infoShow less info |
|
|
Quick fixing mount | |
Quick fixing mount with nut and washer, 135 mm | Show more infoShow less info |
|
|
Quick fixing mount with nut and washer, 60 mm | Show more infoShow less info |
|
|
Rubber cone for quick fixing mount | Show more infoShow less info |
|
|
Set of nuts (1 nut / quick fixing mount) | Show more infoShow less info |
|
|
Fixing for roof safety on sealing layer mat and roof membrane. A unique product that allows simple, secure, sealed installation, regardless of the surface. The sealing plate is supplied in a raised and a smooth version. The raised version has pre-threaded holes to make installation easier. Tested and approved for all sealing layers according to minimum function requirement 121 specified in BRF report R57:1990. | |
Description | |
---|---|
Spacer | Show more infoShow less info |
|
|
Set of bolts for spacer (1 set / spacer) | Show more infoShow less info |
|
|
Rubber washer Ø35 mm (2 / spacer) | Show more infoShow less info |
|
|
Sealing plate, smooth | |
Sealing plate, smooth | Show more infoShow less info |
|
|
Set of bolts (2 bolts / plate) | Show more infoShow less info |
|
|
Set of nuts (10) | Show more infoShow less info |
|
|
Wood screws (6 screws / plate) | Show more infoShow less info |
|
|
Sealing plate, raised | |
Sealing plate, raised | Show more infoShow less info |
|
|
Set of bolts (2 bolts / plate) | Show more infoShow less info |
|
|
Wood screws (6 screws / plate) | Show more infoShow less info |
|
|
A simple clamp fixing that is approved for use on all types of double-folded sheet metal as well as stainless steel seam-welded folds. |
|
Description | |
---|---|
Spacer * | Show more infoShow less info |
|
|
Set of bolts for spacer (1 set / spacer) | Show more infoShow less info |
|
|
Standing seam mount | Show more infoShow less info |
|
|
Set of bolts for standing seam mount (1 bolt / fixing) | Show more infoShow less info |
|
|
Set of nuts (1 nut / fixing) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder" or the snow rake
Standing seam mount for prefabricated strip covering, so-called Snap-on-Roofs. The mounts are approved for installation on all available makes of Snap-on-Roof and they function in the same way as the standard standing seam mounts. The mount is reversible and it is suitable for roofs laid left to right and right to left. The ladder mount is approved for roof ladders and snow rakes. |
|
Description | |
---|---|
Standing seam mount for Snap-on-Roofs | Show more infoShow less info |
|
|
Spacer * | Show more infoShow less info |
|
|
Set of bolts for spacer (1 set / spacer) | Show more infoShow less info |
|
|
Set of bolts for standing seam mount (1 bolt / fixing) | Show more infoShow less info |
|
|
Set of nuts (1 nut / fixing) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder" or the snow rake
Weland fixing plate is used for all product groups on tile-profiled metal roofs and certain TRP metal roofs. The fixing plates are installed with square bent U-bolts that are inserted from above. Approved for at least 0.5 mm steel plate. |
|
Description | |
---|---|
Spacer * | Show more infoShow less info |
|
|
Set of bolts for spacer (1 set / spacer) | Show more infoShow less info |
|
|
Universal fixing plate c/c 120-170 mm | Show more infoShow less info |
|
|
Universal fixing plate c/c 170-220 mm | Show more infoShow less info |
|
|
Set of bolts for fixing plate (1 set / plate) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
A ladder is installed with at least 3 Fixing profiles. On short ladders, 2 fixing profiles are installed for the upper spacer. Double fixing profiles/spacers can be used in the event of significant snow loads. | |
Description | |
---|---|
Spacer * | Show more infoShow less info |
|
|
Set of bolts for spacer (1 set / spacer) | Show more infoShow less info |
|
|
Fixing profile, universal, for ladder | Show more infoShow less info |
|
|
Set of screws for sheet metal <0.7 mm (5 staps/fixing) | Show more infoShow less info |
|
|
Set of self drilling screws for sheet metal >=0.7 mm (5 staps/fixing) | Show more infoShow less info |
|
|
Set of coach bolts (1 bolt / fixing) | Show more infoShow less info |
|
|
Set of nuts (1 bolt / fixing) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
Fast, simple fixing of all product groups. The footplate is used when it is difficult to gain access under the tongued and grooved board. For example, where there is an air gap or insulated false ceilings and furnished attics. The footplate is approved down to 17 mm tongued and grooved board / 12 mm plywood. |
|
Description | |
---|---|
Footplate (1 / fixing) | Show more infoShow less info |
|
|
Fixing iron (1 / fixing) | Show more infoShow less info |
|
|
Spacer* (1 / fixing) | Show more infoShow less info |
|
|
Set of bolts for spacer* (1 set / spacer) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / fixing iron) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / fixing iron) | Show more infoShow less info |
|
|
Set of wood screws (10 screws / footplate | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
Simple fixing where there is a false ceiling of plastic film, fibreboard or particle board that does not allow fixing in the false ceiling. The lath dimensions must be at least 45 x 70 mm. The lath mount is installed on top and has no hook on the underside, which means that installation can also be performed above the roof truss. The fixing is approved for all product groups. |
|
Description | |
---|---|
Fixing iron (1 / fixing) | Show more infoShow less info |
|
|
Spacer* (1 / fixing) | Show more infoShow less info |
|
|
Set of bolts for spacer* (1 set / spacer) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / fixing iron + 2 bolts / lath mount) | Show more infoShow less info |
|
|
Set of nuts (2 nuts / fixing iron + 2 bolts / lath mount) | Show more infoShow less info |
|
|
Lateral displacement lath mount (1 / fixing) | Show more infoShow less info |
|
|
Wood screws (5 screws / mount) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder"
Fixing universal ladder with fixing profile |
|
Description | |
---|---|
Cross brace for universal ladder | Show more infoShow less info |
|
|
Fixing profile (2 / cross brace) | Show more infoShow less info |
|
|
Set of screws for sheet metal <0.7 mm (5 screws/fixing profile) | Show more infoShow less info |
|
|
Set of self drilling screws for sheet metal >=0.7 mm (5 screws/fixing profile) | Show more infoShow less info |
|
|
Set of bolts (1 bolt / fixing profile) | Show more infoShow less info |
|
|
Set of bolts (1 bolt / fixing profile) | Show more infoShow less info |
|
|
Set of nuts (2 bolts / fixing profile) | Show more infoShow less info |
|
|
Mounting tools | |
Socket with ball E6 H8.0x50 | Show more infoShow less info |
|
|
Bit holder E6 1/4x55 MC | Show more infoShow less info |
|
|
Fixing universal ladder with base plate |
|
Description | |
---|---|
Cross brace for universal ladder | Show more infoShow less info |
|
|
Base plate (1 / cross brace) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / base plate) | Show more infoShow less info |
|
|
Set of bolts (2 bolts / base plate) | Show more infoShow less info |
|
|
Set of nuts (4 nuts / base plate) | Show more infoShow less info |
|
|
Wood screws (10 screws / base plate) | Show more infoShow less info |
|
|
Fixing universal ladder with standing seam mount |
|
Description | |
---|---|
Cross brace for universal ladder (fold) | Show more infoShow less info |
|
|
Standing seam mount (1 / cross brace) | Show more infoShow less info |
|
|
Set of bolts (3 bolts / standing seam mount) | Show more infoShow less info |
|
|
Set of nuts (3 nuts / standing seam mount) | Show more infoShow less info |
|
|
Standing seam mount intended for universal ladder for prefabricated strip covering, so-called Snap-on-Roofs. The mounts are approved for installation on all available makes of Snap-on-Roof and they function in the same way as the standard standing seam mounts. The mount is reversible and it is suitable for roofs laid left to right and right to left. The ladder mount is approved for roof ladders and snow rakes. |
|
Description | |
---|---|
Standing seam mount for Snap-on-Roofs (1 / cross brace) | Show more infoShow less info |
|
|
Cross brace for universal ladder (fold) | Show more infoShow less info |
|
|
Set of bolts (3 bolts / standing seam mount) | Show more infoShow less info |
|
|
Set of nuts (3 nuts / standing seam mount) | Show more infoShow less info |
|
|
* Only used when installing "Weland roof ladder" and "Roof gangway as ladder" or the snow rake
Safety on the Roof
The footplate is screwed to under-roofs in tongued and grooved boards, min. 17 mm or plywood min. 12 mm.
Adjustable Lath Mount Assembly Instructions.
Standing Seam Mount Assembly Instruction for Double-folded sheet metal
Base Plate Assembly Instruction
Assembly Instruction for Sealing Plate
Assembly instructions for fixing profile/metal MA1009
Assembly instructions for standing seam mount for diagonal fold MA1010
Assembly instructions for slate mount MA1011
Assembly instructions for corrugated fibre cement MA1014
Assembly instructions for fixing profile universal MA1015
Standing Seam Mount for "Snap-on Roofs? Assembly Instruction
Maintenance of roof safety products
Maintenance Instructions - FDU documentation for Weland Stål AB
Quality policy for Weland Stål AB
Environmental Policy of Weland Stål AB
ISO-certificate ISO 9001:2015 & ISO 14001:2015
ISO-certificate ISO 9001:2015
Environmental Declaration Weland Stål AB
Guarantee for the surface treatment of roof safety products