Assembly Instructions Wire System. Weline on gangway - MA1801
Assembly Instructions Wire System ? Weline on gangway
- 12/10/2015
- 2
- Assembly Instructions; Wire System; Weline; gangway
Weline Wire System
Create calculation
Use our calculation program to create complete tenders for your roof safety products directly on our website.
Product information: Fall protection, Weline
Weland Stål's own fall protection system, Weline, is available in three versions, Track, Claw and Tube.
Common to all systems is a wire that is installed along the roof gangway, roof ladder, ridge rail, work platform or directly on the roof. Users couple their safety line to a runner or directly to the wire and they then have a very flexible safety system when carrying out work and maintenance on roofs and other exposed workplaces.
The Weline wire system can be connected to Weland Stål's roof safety products and other Swedish brands. Weline can be installed during new production and on older existing systems.
For installation on existing roof safety systems, these must be installed with at least three fixing points on the roof, free from damage and installed according to the installation instructions applying on the installation date.
Unique mount
Weland Stål has developed a new mount for installing the wire system directly on to flat roofs. Using the new mount, roof gangways, ridge rail or ladders are not needed when installing Weline. The mount is installed directly on to the sealing plates and the distance between the attachment points is a maximum of 10 metres. With our new mount for the Weline series, a safe and functional safety solution can be created for an unbeatable price. This new solution can replace the ridge rail and lifeline fastener on felt or membrane roofs.
Support points
The maximum separation between supports on vertical sections is 10 metres and along roof drops with up to 15 degrees gradient. Between 15-50 degrees gradient, the maximum distance is 2.5 metres. Above 50 degrees gradient, the maximum is 1.2 metres. If users want to use the wire as a support during work, we recommend a maximum distance of 2.5 metres between the support points.
Note! Support does not mean that you can work suspended from the system, e.g. over the roof edge.
Planning
For sections shorter than 5 metres, wire is not normally considered to be necessary. The wire must be at least 0.5 metre shorter than the gangway/ridge rail or the ladder on which it is installed.
Best used on straight stretches on horizontal or flat sections (maximum 15 degrees).
|
|
| Weline Track for roof gangways | |
|---|---|
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support track | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Square bent U-bolt M8 2 x | Show more infoShow less info |
|
|
|
| Weline Track for ridge rails | |
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support track | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Weline Track for flat felt roofs | |
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support track | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Bracket plain roofs | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Rubber washer Ø35 mm (2 x / bracket) | Show more infoShow less info |
|
|
|
| Sealing plate, raised | Show more infoShow less info |
|
|
|
Can also be used along gangways and ladders in the direction of the roof fall, up to 50 degrees. |
|
| Weline Claw for roof gangways | |
|---|---|
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support claw | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Square bent U-bolt M8 2 x | Show more infoShow less info |
|
|
|
| Weline Claw for ridge rails | |
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support Claw | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Weline Claw for roof ladders | |
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support Claw | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Weline Claw for flat felt roofs | |
| Bracket for wire support | Show more infoShow less info |
|
|
|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire support Claw | Show more infoShow less info |
|
|
|
| Wire slider open | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Bracket plain roofs | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Carriage bolt 10 x M10x30 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Rubber washer Ø35 mm (2 x / bracket) | Show more infoShow less info |
|
|
|
| Sealing plate, raised | Show more infoShow less info |
|
|
|
Users connect to an open runner and can then move freely along the wire or roof area. Can also be installed along cat ladders and steep gradients with the fall stop's fitted support points. |
|
| Weline Tube for roof gangways | |
|---|---|
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire runner open | Show more infoShow less info |
|
|
|
| Wire mount Tube | Show more infoShow less info |
|
|
|
| Wire mount Tube fall stop | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Wire runner open demountable | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Weline Tube for ridge rails | |
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire runner open | Show more infoShow less info |
|
|
|
| Wire mount Tube | Show more infoShow less info |
|
|
|
| Wire mount Tube fall stop | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Wire runner open demountable | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Weline Tube for roof ladders | |
| End bracket wire | Show more infoShow less info |
|
|
|
| Wire runner open | Show more infoShow less info |
|
|
|
| Wire mount Tube | Show more infoShow less info |
|
|
|
| Wire mount Tube fall stop | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Wire runner open demountable | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Bolt set | Show more infoShow less info |
|
|
|
| Weline Tube for flat felt roofs | |
| End bracket wire | Show more infoShow less info |
|
|
|
| Bracket plain roofs | Show more infoShow less info |
|
|
|
| Wire runner open | Show more infoShow less info |
|
|
|
| Wire mount Tube | Show more infoShow less info |
|
|
|
| Wire mount Tube fall stop | Show more infoShow less info |
|
|
|
| End terminal mounted on wire | Show more infoShow less info |
|
|
|
| 8 mm wire for cutting to size | Show more infoShow less info |
|
|
|
| 8 mm wire in fixed lengths, terminated | Show more infoShow less info |
|
|
|
| Joining tube for wire | Show more infoShow less info |
|
|
|
| Wire runner open demountable | Show more infoShow less info |
|
|
|
| Bolt kit 10 x M10x20 | Show more infoShow less info |
|
|
|
| Nut set 10 x M10 | Show more infoShow less info |
|
|
|
| Rubber washer Ø35 mm (2 x / bracket) | Show more infoShow less info |
|
|
|
| Sealing plate, raised | Show more infoShow less info |
|
|
|
Related products
Installation instructions
Here you will find installation instructions related to this product
Surface treatment
Products are stocked in:
- Hot dip galvanised / Zink/Magnesium ZM310
- Painted red
(RAL 3009) - Painted black
(RAL 9005) - Painted gray
(RAL 7011) - Painted brick red
(RAL 8004)
Other colours, copper and stainless steel are available by order.
We keep part of our stainless steel range in stock.
Accessories
With continuous fixing, it may be necessary to go round corners and past obstacles. We have a simple solution that makes bends with continuous wire possible. The system has an open runner. The wire can be connected to the wire wherever wanted. Note! The clamping sleeve must not be used as an end lock. |
|
| Description | |
|---|---|
| Wire Clamping sleeve | Show more infoShow less info |
|
|
|
| Wire mount Tube | Show more infoShow less info |
|
|
|
| Wire mount Tube, fall stop | Show more infoShow less info |
|
|
|
| Runner for wire, open, stainless steel | Show more infoShow less info |
|
|
|
| Runner for wire, open, hot-dip galvanised | Show more infoShow less info |
|
|
|
Documentation
Brochures
Assembly Instructions
Assembly Instructions Wire System. Weline on ridge railings - MA1802
Assembly Instructions Wire System ? Weline on ridge railings
- 06/07/2015
- 2
- Assembly Instructions; Wire System; Weline; ridge railings
Assembly Instructions Wire System. Weline on Sealing Plate - MA1803
Assembly Instructions Wire System ? Weline on Sealing Plate
- 06/07/2015
- 2
- Assembly Instructions; Wire System; Weline; Sealing Plate
Assembly Instructions Wire System - WeLine corner gangway - MA1804
Assembly Instructions Wire System - WeLine corner gangway
- 06/11/2015
- 2
- Assembly Instructions; Wire System; WeLine corner; gangway
Assembly Instructions Wire System on Roof, Cat Ladder - MA1805
Assembly Instructions Wire System on Roof, Cat Ladder - MA1805
- 09/05/2017
- 2
- Assembly Instructions Wire System on Roof, Cat Ladder - MA1805; Assembly Instruction; Weland Stål
Assembly instructions wire joint and corner - MA1806
Assembly instructions wire joint and corner - MA1806
- 09/05/2017
- 1
- Assembly instructions wire joint and corner - MA1806; Weland Stål, assembly instruction
Maintenance Instructions
Maintenance of roof safety products
Maintenance of roof safety products
- 11/09/2013
- 1
- maintenance; roof safety; Weland Stål AB
Maintenance Instructions - FDU documentation
Maintenance Instructions - FDU documentation for Weland Stål AB
- 12/09/2013
- 5
- basis for design & calculations; materials and manufacturing; surface treatment; handling; maintenance; care of hot dip galvanised products; care of Painted surfaces; care of wooden parts; care of mats on steps or landings; care of terrazzo
CAD details
Certificates
Product Sheet - Wire System
Product Sheet - Wire System
- 17/08/2017
- 2
- Product Sheet, roof safety, Wire System, Weland Stål AB
Quality policy for Weland Stål AB
Quality policy for Weland Stål AB
- 11/09/2013
- 1
- maintenance; roof safety; Weland Stål AB
Environmental Policy
Environmental Policy of Weland Stål AB
- 11/09/2013
- 1
- recycling; environmental; modern; technology
ISO-certificate ISO 9001:2015 & ISO 14001:2015 - Weland Stål AB
ISO-certificate ISO 9001:2015 & ISO 14001:2015
- 19/08/2019
- 1
- ISO-certificate; certificate; 9001; 14001
ISO-certificate ISO 9001:2015 - Zinken Weland i Ulricehamn AB
ISO-certificate ISO 9001:2015
- 19/08/2019
- 1
- ISO-certificate; ISO; certificate; 9001
Environmental Declaration
Environmental Declaration Weland Stål AB
- 11/09/2013
- 1
- powder-coating; waste handling; ;recycling; hot dip galvanisation; painting
Guarantee for the surface treatment of roof safety products
Guarantee for the surface treatment of roof safety products
- 19/03/2015
- 1
- Guarantee; service life; surface; treatment; Hot-dip galvanised steel; Stainless steel; Copper; Magnelis; Powder-coated; roof safety products
Load tables
Films
Reference images
-
be00002676.jpg
Lacquered roof gangway with Weline wire system.
26/02/2016
Included in gallery:
Wiresystem Weline
-
be00002672.jpg
Lacquered roof gangway with Weline wire system.
26/02/2016
Included in gallery:
Wiresystem Weline
-
be00002671.jpg
Weline wire system installed on roof gangway.
26/02/2016
Included in gallery:
Wiresystem Weline
-
be00002664.jpg
Weline wire system installed on roof gangway.
26/02/2016
Included in gallery:
Wiresystem Weline
-
be00002517.jpg
26/03/2015
Included in gallery:
Wiresystem Weline
-
be00002516.jpg
26/03/2015
Included in gallery:
Wiresystem Weline
-
be00002514.jpg
26/03/2015
Included in gallery:
Wiresystem Weline
-
be00002513.jpg
26/03/2015
Included in gallery:
Wiresystem Weline
| View gallery | ||
|---|---|---|
|
|
